Robust metal case with advanced corrosion protective coating
Intuitive touchscreen control with icon-based menu structure simplifies operation and clearly displays test parameters throughout run
Unidirectional and/or bidirectional agitator pattern for the most representative cycle testing
Independent digital heater/circulator maintains a constant temperature and minimises vibration
Optional: Refrigeration unit for cold cycle testing (>10°C)
‘Easy-Centre’ centring system for precise vessel positioning
Easy-clean Viton® membrane-sealed zero-evaporation lids included as standard
PT100 temperature probe monitors bath and vessel temperature with electronic calibration feature
The TRG 800i is supplied with resin paddles as standard.
We also offer optional paddles with holes for fabric attachment (catalogue number: 6404A), which accept up to 12, 5 cm x 5 cm or 6, 8 cm x 8 cm swatches, meaning the TRG 800i can test between 48 or 96 individual swatches simultaneously (42 or 84 where refrigeration unit used).
A separate attachment is also available for the evaluation of detergents used in domestic dishwashers (see TRG 800i Accessories below for further details).
Number of Test Stations:
Up to 8
Heater Temperature Range:
Ambient – 70°C (10°C – 70°C with optional Refrigeration Unit)
Agitator Speed Range:
20 – 220 rpm
Set of 8 SS Paddles with holes for fabric attachment Catalogue Number:
Dishwasher Slide Accessory for Tergotometer Catalogue Number:
Unit Dimensions (w x d x h):
728 x 490 x 772 mm (TRGi unit only)
260 x 330 x 150 mm (heater)
350 x 470 x 300 mm (refrigeration unit)
Boosts testing throughput by up to 8 times compared with conventional domestic appliances
Precision control of test parameters for accurate and reproducible detergent testing
Lower energy consumption compared with standard domestic appliances
Smaller quantities of test materials, water and detergents are required per test compared to standard domestic appliances
Space-saving benchtop system saves precious laboratory space compared with traditional appliances
Extensive data reporting output options: RS 232, USB A and USB B
To support the testing of detergents designed to work at cooler temperatures, Copley offers an optional refrigeration unit (ambient down to 10 degrees C).
Note: Use of the refrigeration unit reduces the number of usable test stations to seven.
Dishwasher detergents can be tested using a special accessory affixed to the conventional agitator in each tergotometer vessel.
Assess the performance of dishwasher detergents using test cycles as short as 10 minutes with the specialist dishwasher accessory (please note, pre-stained sample slides are not included with the Dishwasher Accessory)
Ideal for testing detergent performance at temperatures up to 70 degrees C.