Contact Us
Contact Us
Breath Actuation Controller 200iX®
The BAC 200iX controls sampling duration and actuation timing for Delivered Dose Uniformity (DDU) testing and Aerodynamic Particle Size Distribution (APSD) measurement of orally inhaled and nasal drug products (OINDPs). It is designed for testing applications where critical (sonic) flow control is not required.
Combining guided test set-up with an integrated timer and a range of automated functions, the BAC 200iX helps laboratories establish controlled and repeatable test conditions while simplifying routine testing workflows. Extended test durations of up to 50 minutes provide greater flexibility across a broad range of applications.
The BAC 200iX brings method control, user permissions, audit logging and reporting together within the instrument, helping laboratories standardise test execution and maintain clear, traceable records. These functions support GMP and 21 CFR Part 11 workflows and can be used directly on the BAC 200iX or extended through optional connectivity with Inhalytix®+, our specialist software for inhaler testing data management.
Controlled sampling and actuation for inhaler and nasal product testing
Consistent control of sampling duration and device actuation is an important part of establishing repeatable test conditions for inhaler and nasal product testing.
The BAC 200iX coordinates sampling duration and actuation timing for DDU and APSD measurement, where critical flow control is not required, helping analysts reproduce defined test conditions across routine and repeat testing.
Applications for MDI testing
The BAC 200iX is suited to MDI and nebuliser testing and can be used with conventional and breath-actuated MDIs.
For MDIs used with spacers or Valved Holding Chambers (VHCs), an actuation delay function allows the required delay between device actuation and sampling to be incorporated into the test procedure, supporting relevant Ph. Eur. and USP testing requirements.
External triggering using a Footswitch or MDI Actuation Sensor can also be used to synchronise device actuation with the onset of airflow.
Guided test set-up and operation
The BAC 200iX features a 7-inch touchscreen interface that guides analysts through equipment configuration, test set-up and operation.
Clear on-screen instructions, saved test methods and defined equipment configurations help reduce repeated parameter entry and support consistent execution of routine test procedures.
Guided set-up: Guides analysts through key set-up steps, helping support consistent method execution and reducing the risk of missed parameters. User-selectable English and Chinese language options are available
Equipment configurator: Define and save equipment configurations for individual test methods, supporting consistent set-ups across repeat tests. The optional QR Code Scanner enables compatible equipment details to be captured without manual entry.
Run test: Shows live test progress and key operating information during the run, helping analysts monitor the test in real-time.
Additional features supporting test set-up and operation
The BAC 200iX incorporates a range of automated and practical functions designed to simplify routine activities, reduce manual intervention and help analysts apply defined test procedures.
Automatic vacuum pump control
Automatically switches Copley 7-series vacuum pumps on and off during testing, reducing unnecessary pump runtime and the risk of tests being initiated without vacuum. This helps avoid invalid tests, wasted product and additional cleaning.
Automated in situ impactor leak testing
Perform impactor leak tests as part of the instrument set-up process, helping verify system integrity before testing.
Incorporating this check into the guided workflow helps analysts complete an important system suitability activity consistently.
Automatic test duration calculation
Calculate test duration from the specified sampling volume and flow rate, eliminating the need for manual calculations.
With test durations of up to 50 minutes, the BAC 200iX also accomodates a wider range of testing requirements.
Flow measurement compatibility
Interfaces with compatible flow measurement devices, including the FRS and DFM 2000, to support accurate flow set-up and verification of test conditions.
Equipment identification with the QR Code Scanner
The optional QR Code Scanner enables QR-coded Copley equipment to be identified during test set-up. Equipment details, including model and serial number, can be captured and stored directly on the BAC 200iX against the relevant method and test record. This reduces manual data entry and helps laboratories maintain a clearer, traceable record of the equipment used during testing.
When connected with Inhalytix®+, supported equipment information can also be synchronised as part of the wider digital test record.
Learn more about the QR Code ScannerBAC 200iX: Built-in method management and traceability
The BAC 200iX provides method management, user access controls, audit trails and comprehensive reporting directly on the instrument, supporting controlled testing procedures and traceable records.
Test methods and equipment configurations can be defined, saved and recalled for routine and repeat testing, reducing repeated set-up and supporting consistent application of defined test conditions.
These capabilities support laboratories working to GMP and 21 CFR Part 11 requirements and are available without the need for additional software.
User management: Create and manage authorised users and access permissions directly on the instrument, maintaining control over instrument operation and test records.
Method management: Test methods can be defined, saved and recalled directly on the BAC 200iX, reducing repeated test parameter entry and supporting consistent set-up across routine and repeat testing.
Audit trail: A built-in audit provides a date- and time-stamped record of instrument activities, linked to individual users, supporting traceability, record review and audit requirements.
BAC 200iX/-R Technical Specifications
User Interface: | 7″ touchscreen |
In situ impactor leak testing: | Automated |
Temperature and relative humidity measurement: | Via compatible sensor accessory |
Temperature range and accuracy: | -40°C to 80°C ±0.15°C |
Relative humidity range and accuracy: | 0 to 100% RH* ±1.5% RH |
External trigger options: | MDI Actuation Sensor/ Footswitch |
Vacuum pump control: | Automatic control of Copley 7-series vacuum pumps |
Solenoid valve opening/ closing time: | <100ms / <100ms |
Spacer/ VHC testing delay: | Yes |
Timer range: | 0-50 minutes (resolution 0.1s) |
User interface languages: | English and Chinese (user-selectable) |
Dimensions (w x d h): | 415 x 315 x 250 mm |
BAC 200iX and BAC 200iX-R
The BAC 200iX is available in standard and reversed configurations. The BAC 200iX-R provides the same functionality, with reversed pneumatic connections to support different inhaler testing set-ups.
Related Accessories
Related Services
Training
We offer a range of training courses, presentations and seminars covering a wide range of topics.
Find Out More
Servicing
A comprehensive range of both in-house and on-site product servicing options are available
Find Out More
Support
Our team of experienced technicians and engineers are on hand to help and advise
Find Out More